E650C Windrow Elevator

When there is a long road to pave, and the job needs done quickly and without interruptions, turn to the Weiler E650C  windrow elevator. With its proven high-slat entry to the windrow and its operator-accessible chain speed and directional control, this rugged machine can help lead the way to high production paving.

The material-feed system consists of two auger segments and slat conveyors. The auger segments are positioned on each side of the slat conveyors. The augers remix the material and move it to the slat conveyors for distribution into the hopper.

A three-point suspension system consists of a hydraulic cylinder for each of the front wheels, and a pair of interconnected hydraulic cylinders for the two rear wheels. The cylinders adjust the height of the wheels, which in turn, changes the height of the machine.

Optional Equipment

  • Hydraulic pin push frame
  • Remixing discharge hopper
  • Ni-Hard floor plates
  • Wash down system w/ hose reel
Weight 20,300 lb (9210 kg)
Engine Cat 4.4 137 hp Tier 4
Height 124" (3,150 mm)
Length 230" (5,842 mm)
Length w/ Raised Towing Frame 188" (4,775 mm)
Width w/ Wings In 122" (3,099 mm)
Width w/ Wings Out 184" (4,674 mm)
Conveyor Throat Width 118" (2,997 mm)
Conveyor Slat Width 58" (1,473 mm)
Conveyor Slat Depth 7" (179 mm)
Combining Auger Diameter 29" (737 mm)
Discharge Height 84" (2,134 mm)
Front & Rear Wheel Cylinder Lift 8" (203 mm)
Front Tire Size 22" x 7" (559 mm x 178 mm)
Rear Tire Size 8.25 x R15
Front Wheel Width Range 96" - 170" (2,438 mmm - 4,318 mm)
Fuel Tank Capacity 80 gal (303 L)
Hydraulic Tank Capacity 40 gal (151 L)